turboLinux_White Box Enterprise Linux_Fedora Core_Red Hat Memo/quagga
をテンプレートにして作成
[
トップ
] [
新規
|
一覧
|
検索
|
最終更新
|
ヘルプ
]
開始行:
*ルーティングソフトウェアquagga(クアッガ) [#c3ef5d6f]
RIGHT:更新日 &lastmod();
***インストール [#i6381c61]
$ sudo yum install quagga
$ sudo cp /usr/share/doc/quagga-0.99.22.4/ripd.conf.samp...
sudo chmod -R og+rx /etc/quagga
***起動と確認 [#x591169d]
$ sudo systemctl start zebra
$ sudo systemctl list-units -t service -a | grep zebra
zebra.service loaded activ...
-OS起動時に起動するように設定
$ sudo systemctl enable zebra
Created symlink from /etc/systemd/system/multi-user.targ...
-設定(rip)
$ sudo vtysh
Hello, this is Quagga (version 0.99.22.4).
Copyright 1996-2005 Kunihiro Ishiguro, et al.
openvpn# ←? (Help)
clear Reset functions
configure Configuration from vty interface
copy Copy from one file to another
debug Enable debug messages for specific or all...
disable Turn off privileged mode command
end End current mode and change to enable mode
exit Exit current mode and down to previous mode
list Print command list
no Negate a command or set its defaults
ping Send echo messages
quit Exit current mode and down to previous mode
show Show running system information
ssh Open an ssh connection
start-shell Start UNIX shell
telnet Open a telnet connection
terminal Set terminal line parameters
traceroute Trace route to destination
undebug Disable debugging functions (see also 'de...
write Write running configuration to memory, ne...
openvpn# configure terminal ← 設定モードへ移行
openvpn(config)# int eth0 ← インターフェイスの指定
openvpn(config)# router rip ← ripの設定モードへ移行
openvpn(config-router)# network 192.168.10.0/24 ←ripの提...
openvpn(config-router)# exit
openvpn(config)# exit
openvpn# write memory ← ファイルへの書き込み
Building Configuration...
Configuration saved to /etc/quagga/zebra.conf
[OK]
openvpn# exit
&color(red){以下のエラーの時はselinuxを無効⇒ $ sudo sete...
openvpn# write memory
Building Configuration...
Can't open configuration file /etc/quagga/zebra.conf.E4v...
[OK]
-ルート情報の表示
openvpn# show ip route
Codes: K - kernel route, C - connected, S - static, R - ...
O - OSPF, I - IS-IS, B - BGP, A - Babel,
> - selected route, * - FIB route
K>* 0.0.0.0/0 via 172.31.16.1, eth0
C>* 127.0.0.0/8 is directly connected, lo
C>* 172.31.16.0/20 is directly connected, eth0
K>* 192.168.10.0/24 via 192.168.48.2, tun0
K>* 192.168.48.0/24 via 192.168.48.2, tun0
C>* 192.168.48.2/32 is directly connected, tun0
**参考 [#u3307d00]
-https://users.miraclelinux.com/support/?q=node/184
終了行:
*ルーティングソフトウェアquagga(クアッガ) [#c3ef5d6f]
RIGHT:更新日 &lastmod();
***インストール [#i6381c61]
$ sudo yum install quagga
$ sudo cp /usr/share/doc/quagga-0.99.22.4/ripd.conf.samp...
sudo chmod -R og+rx /etc/quagga
***起動と確認 [#x591169d]
$ sudo systemctl start zebra
$ sudo systemctl list-units -t service -a | grep zebra
zebra.service loaded activ...
-OS起動時に起動するように設定
$ sudo systemctl enable zebra
Created symlink from /etc/systemd/system/multi-user.targ...
-設定(rip)
$ sudo vtysh
Hello, this is Quagga (version 0.99.22.4).
Copyright 1996-2005 Kunihiro Ishiguro, et al.
openvpn# ←? (Help)
clear Reset functions
configure Configuration from vty interface
copy Copy from one file to another
debug Enable debug messages for specific or all...
disable Turn off privileged mode command
end End current mode and change to enable mode
exit Exit current mode and down to previous mode
list Print command list
no Negate a command or set its defaults
ping Send echo messages
quit Exit current mode and down to previous mode
show Show running system information
ssh Open an ssh connection
start-shell Start UNIX shell
telnet Open a telnet connection
terminal Set terminal line parameters
traceroute Trace route to destination
undebug Disable debugging functions (see also 'de...
write Write running configuration to memory, ne...
openvpn# configure terminal ← 設定モードへ移行
openvpn(config)# int eth0 ← インターフェイスの指定
openvpn(config)# router rip ← ripの設定モードへ移行
openvpn(config-router)# network 192.168.10.0/24 ←ripの提...
openvpn(config-router)# exit
openvpn(config)# exit
openvpn# write memory ← ファイルへの書き込み
Building Configuration...
Configuration saved to /etc/quagga/zebra.conf
[OK]
openvpn# exit
&color(red){以下のエラーの時はselinuxを無効⇒ $ sudo sete...
openvpn# write memory
Building Configuration...
Can't open configuration file /etc/quagga/zebra.conf.E4v...
[OK]
-ルート情報の表示
openvpn# show ip route
Codes: K - kernel route, C - connected, S - static, R - ...
O - OSPF, I - IS-IS, B - BGP, A - Babel,
> - selected route, * - FIB route
K>* 0.0.0.0/0 via 172.31.16.1, eth0
C>* 127.0.0.0/8 is directly connected, lo
C>* 172.31.16.0/20 is directly connected, eth0
K>* 192.168.10.0/24 via 192.168.48.2, tun0
K>* 192.168.48.0/24 via 192.168.48.2, tun0
C>* 192.168.48.2/32 is directly connected, tun0
**参考 [#u3307d00]
-https://users.miraclelinux.com/support/?q=node/184
ページ名:
![[PukiWiki]](image/../localimages/Atom.gif "[PukiWiki]")
